Brief Description
- Be able to recognise and install hardware and be able to replace modules when a fault occurs.
- Be able to operate the Logo software to make it perform certain tasks.
- Understand basic Logo instruction set and be able to make minor modifications to software.
- Be able to backup and restore a Logo program when required.
- Be able to perform basic system diagnostics when a problem occurs.
- Interface with the LOGO TD
Course Content
To fault find a system you need to know EXACTLY how it works
-
Establish a link to the Logo
-
If comms problem check the interface
-
Create a blank project and take a backup (just in case I mess up)
-
Open project for LOGO
-
Change modules if necessary (with spares and without spares)
-
Hardware Configuration
-
Clear Memory and Download program
-
Check software against latest copy (Compare function)
-
Simulating code
-
Online Monitoring program
-
Searching for specific operands and instructions
-
Changing timer, counter values via Logo screen
-
Displaying messages on the LOGO screen
-
Documentation (Symbols, Comments)
-
Printing Cross Reference / Program Listings etc.
-
Displaying Error and opertaor messages
Background information also covered
Understanding of the following:
-
FBD and Ladder programming
- Inputs (I), Outputs (Q), Flags (M)
- AND, OR, XOR, NAND, NOT functions
- Interconnecting functions
- Documenting program
- Basic Instructions, contacts, coils, Set, reset etc.
- Timers, Counters
- Pulse generators
- Error / Info Window
- Linking to LOGO TD display
- Fault finding tips
Course Documentation
- Siemens LOGO Manual
Course Equipment (per delegate)
- Siemens Logo
- PC or Laptop
- Simulator
Reviews
Excellent Course
Course: Siemens S7 1200 and WinCC HMI Basics
Course covered TIA Portal introduction and programming. Instructor has sound knowledge and experience in the field and is able to pass this on. Highly recommended.
- Sean (October 27, 2021)
Great course
Course: Siemens S7 300/400 PLC & WinCC Flex HMI Level 2
Very good and in depth course with lots of information we covered a range of PLCs and programs. Mick made it very simple to understand and answered all questions we had. Very knowledgeable and friendly instructor
- Harry Tredaway (October 1, 2021)
PLC Training course
Course: Siemens S7 1200/1500 and WinCC TIA Portal Level 2
Very good course, plenty of information and a friendly instructor. Highly recommend if you need to know more about PLCs,
- Luke thackery (October 1, 2021)
My experience
Course: Siemens S7 300/400 PLC & WinCC Flex HMI Level 1
Great experience Tutor was very helpful and friendly Learnt a lot would definitely recommend
- Joel Chapman (October 1, 2021)
Highly recommend
Course: Siemens S7 EAL Level 3 Unit (601/5326/ X Programmable Logic Controllers 3)
Excellent course. Would highly recommend, especially for any engineers leaving the forces and going in to a maintenance role
- Steven Meldrum (December 18, 2020)
Submit a review for Siemens Logo
Fill out the form below to submit a review we would love to know your opinion.
All the fields with a * are required fields.